Two angular contact ball bearings, the use of clearance problems
The installation form is DB, and the inner ring preload is adjusted. For example, by adjusting the nut of the lock inner ring, tighten the force adjustment. Generally selected bearings, manufacturers have been conscious of the inner ring and outer ring thickness is not the same, that is, as long as locking the inner ring, the force is the factory set the amount of preload.
No adjustment required,DB: back to backDF: face to faceDT: series connectionSU: single arbitrary combinationDU: any combination of two bearings.
Bearing in pairs need not be adjusted! The bearing is marked with letters!DB: back to backDF: face to faceDT: series connectionSU: single arbitrary combinationDU: any combination of two bearings.There is also a combination of three columns and four columns with letters on each bearing!Among them, when selecting the SU mark bearing, it is necessary to choose the bearings with the most close tolerance of the inner and outer ring diameter together. Clearance adjustment is also relatively easy.It is difficult to pair the bearings by adjusting the two common bearings together by adjusting the experience. It is best not to try in such a strict place!
