Types of pneumatic Triplex Oil
Pneumatic three on the oil mist lubricating oil cup for turbine oil: No. 1 (International designation: ISO VG32), its properties are very thin viscosity of 7E degrees (the equivalent of lubricating oil, sewing machine oil 5E degrees ~7E)
Now most of the cylinder, valve generally in the pneumatic components of the pre sliding parts parts into the semi-solid grease like (or paste oil) called non oil components. Therefore, there is no need to provide oil mist lubrication in such pneumatic transmission. If the oil mist lubrication to non oil pneumatic components, not only has no meaning, and semi solid lubricating grease is very thin oil mist and oil slowly dilute the sealed gas loss is bad. If the oil has been supplied with oil mist, it should remain the same.
GB brand: 7 mechanical lubricants (viscosity 7E degrees), sewing machine oil, but also a relatively convenient choice. Its oil mist is thin and can be ejected into the pipeline about 2M or so. And after the oil mist lubrication, it will be discharged with the valve, not in the cylinder memory.
