1. what type of vehicle does the roller belong to?2. can the roller run on the road without work?3. what are the laws and regulations on road vehicles such as rollers?4. a case: a car on the road when the rear end hit a roller inside the car tail, causing casualties, ask how the roller will be responsible? What is the legal basis for the responsibility?
I used to drive overvoltage machines. It was relatively early. I was able to drive on the road a long time ago, and then I couldn't do it. I think the rollers should belong to special machines.You said the rear end of the car, I think: if the roller does not violate the rules, it should be sentenced to full responsibility for the car, you'd better consult the professionals, such as lawyers.
I used to open digging at the site, I know the mechanical crawler excavator is not directly on the road. There should be no problem with the rollers. The vibration and the iron wheels are all straight to the road!
4, if the roller running normally, and through the municipal engineering administrative department approval, because the transition needs no violation driving. It is only after the accident scene has been identified that the conclusion can be reached.
1. Roller belongs to construction machinery2, non working conditions should be prohibited on the road (except because of construction transitions)3: according to the regulations on the administration of urban roads (Decree No. 198th of the State Council), twenty-eighth articlesLicense conditions: tracked vehicle, iron wheel carts or overweight, high and long vehicles driving on the roads in the city, shall be the competent administrative department for approval of municipal engineering agree, and in accordance with the traffic police department designated the time and route.
