Vacuum belt dewatering machine filter cloth discount deviation what happened?
Dehydration is not good, there are several reasons: 1. vacuum is not enough, increase the vacuum pump power...Not very clear, I plan to use a newspaper, when the newspaper notice whether there are skirts, materials, filter particle size on itThe quality of this cloth is Never mind ah and runtime must always pay attention to good, once found deviation to timely calibration, don't wait until the discount is not adjusted, of course easy to damage... A piece of cloth or very expensive. After several adjustments, basically can not be adjusted, if the continuous adjustment and repair, then it is necessary to see whether the bearings are unevenIs it the power cord of the motor? If it is right or wrong, find the thread and connect it up.
Deviation, there are three reasons: 1., machine adjustment is not in place. (specifically, ask the manufacturer) 2. filter cloth sewing time is not normal, uneven elasticity. The 3. filter Buben is too poor, too you according to article three above the control treatment.
1, check whether the cloth roll won't turn rusty pinto. 2, check whether the switch failure of partial gas nang. 3, filter cloth connector has been biased not correct, need to re connect. 4, the tail tensioner is already to the limit, the cloth is too loose.I really don't understand the vacuum belt dryerHa ha, you amateur, no wonder not good.
