What about tapered roller bearings, tapered roller bearings, and Rui bearings?
When the bearing is subjected to radial load, an axial component is produced, so that when another bearing is required to bear the axial force in the opposite direction, it will be balanced.Structure characteristicseditTapered roller bearings are of type 30000, and tapered roller bearings are separate bearings. Under normal circumstances, especially in the size range GB/T307.1-94 "rolling bearing radial bearing tolerances" involved in the tapered roller bearing outer ring and inner components are interchangeable with one hundred percent.
The tapered roller bearings belong to separate bearings, and the inner and outer rings of the bearing have tapered raceways. The bearings are divided into single row, double row and four row tapered roller bearings according to the number of rollers arranged. Single row tapered roller bearings can bear radial loads and axial loads in a single direction.
The angle of the outer race and the diameter of the outer raceway are the same as the dimensions and are standardized. Changes are not allowed during design and manufacture. Therefore, the outer ring and the inner component of the tapered roller bearing can be interchanged and interchangeable all over the world.Tapered roller bearings are mainly used to bear radial load combined radial and axial load. Compared with angular contact ball bearing, the bearing capacity is large and the limit speed is low. Tapered roller bearings can withstand axial loads in one direction and can limit axial displacements in one direction of the shaft or shell.
