Road and dimmer module has a major characteristics: such as a four-way adjustable light module, each all the way to control the load capacity of different (but) is the total capacity.
The modulation method includes: PWM, cutting phase, 1-10v signal adjustment, etc. The PWM tuner is the goal of adjusting light by controlling the amount of electrical time in LED lights. The adjustment is good. However, the installation of wiring in the site is more troublesome and requires professional guidance. 1-10 v dimmer way its signal easily affected by the length and the quality of wire rod, there might be a dimmer uneven or same scene brightness different lamp brightness is not consistent with the phenomenon. The wiring cost is higher. The cutting phase is simple and cost base. However, the leds should be adjusted for the cutting phase. It's better to cut the light than other light tones. Constant pressure and constant current LED lamps can be used in the cutting phase.
ELG network digital programmable optical controller (module) technical parameters [lighting lighting control special] ELGxxYY is a digital lighting controller for intelligent programmable lighting lighting, which can be used separately or in connection with other ELG series of products.
No problem at all, the total number of the four circuits is 16A, 220X16A = 3520W, and if you take a loop, the maximum is 3520W. So the other circuits can't load. So the four circuits add up to no more than 16A, the load capacity of the four circuits is different. If it's broken, I'll change it for you.
