First, MDF
???????The industry is called blockboard, which is made up of two veneers in the middle of the sticky pressure, the price of the big core board is cheaper than the core board, the bending strength is poor, but the transverse flexural strength is higher.
???????Plate specifications: 2440mm * 1220mm, according to the thickness of the general is 3,5,9 PCT board
????Three, particleboard
???????Is melamine impregnated film paper facing wood panel. It is with different colors or textures of paper into the melamine resin adhesive soak, and then dried to a certain degree of curing, will be paved in the particleboard, medium density fiberboard or hard fiber board surface, the heat from the heat Decorative plates.
???????Plate specifications: 2440mm * 1220mm
????Five, gypsum board
???????Line commonly known as fine core board, from three or more layers of 1mm thick veneer or sheet adhesive made of hot pressing. It is the most commonly used material in handmade furnishings.
???????Plate specifications: 3mm, 5mm, 9mm, 12mm, 15mm, 18mm six
????Seven, decorative panels
??????????The use of siliceous materials or calcium material as the main raw material, with a certain percentage of fiber materials, light orthopedic, adhesive and chemical additives mixed by the autoclave technology from the decorative plate.
???????Plate size: thickness is generally 0.8mm, 1mm and 1.2mm
Usually made of standard size flat rectangular building material board, as a wall, ceiling or floor components. Also refers to the forging, rolling or casting made of metal plate. Divided into thin plate, medium plate, thick plate, special thick plate, usually made of standard size flat rectangular building material board.
According to the material classification can be divided into solid wood, wood-based panels two categories; according to the classification can be divided into solid plate, plywood, fiberboard, decorative panels, fire board, particleboard and so on.
The types of plates are solid wood and wood-based panels. First, solid wood: 1, solid wood puzzle: semi-artificial system, the method that is taken from the solid wood, with glue to tooth or straight fight spell out of the artificial plate. Building used in the template is also solid wood, but generally made with Zamu. 2, solid wood: directly to solid wood saws, dried from, without stitching, there are specifications for sale. Second, wood-based panels: 1, MDF: sub-high-density fiberboard, medium density fiberboard, low-density particleboard three, of which high-density board generally hand-made composite floor, doors, MDF used for furniture, furniture In the furniture are generally made in the MDF substrate. Low-density particleboard, also known as particleboard, is also very popular in the furniture, especially office furniture often used. Thickness, respectively, high-density board: 8 to 12 mm thick MDF: 3,5,12,15,18,25 mm several thickness; particleboard generally have: 9,12,15,18,25 mm several thickness The Flat specifications are generally 1220 * 2440 and 1800 * 3600 two, high-density board is not set. MDF is also used to make melamine board, that is, with the MDF to do the substrate, in the above with a machine pressure on a layer of 0.3mm thick melamine paper made. Substrate high school density and particleboard have, the composite floor is made of high density plate pressure melamine paper made of three, blockboard and plywood: blockboard also known as big core board, that is, with solid wood fight plate, on The following pressure made of a layer of veneer, often used in the decoration for the use of load-bearing materials, in fact, it can be considered a kind of splint, the standard thickness of the general 16 mm plywood, that is purely cut with a layer of veneer Respectively, 3,5,12,15,18,25 and other, specifications are generally 1220 * 2440 mm
