What are the technical parameters of the electric shelves?
1, the power intensive frame adopts the national archives, DA/T7-92 file Shelves standard and GB/T13667.3-92 manual shelves, technical conditions, national standards.2, steel shelves, periodicals shelves only use GB/T13667.1-92 steel shelves, general technical standards.
1, the sheet used in full compliance with GB11253-89 cold-rolled steel plate of the national standards.2. Other materials, such as square steel and round steel, conform to the GB/T905-94 standard. The cast iron parts meet the GB9439-88 standard. The seamless steel tube meets the GB8162-87 standard.
Standard frame: a series of files produced by our company shelves, shelves, shelves frame body height 2315mm, length 900mm, width 560mm, conventional layer 6, layer spacing can adjust layer from a minimum of 114mm, with 17.6mm increasing; shelf high frame 2000mm, pitch 1000mm long, 450mm wide. The conventional 6 layer, layer spacing can be adjusted.1, product structure: a series of dense shelves, bookshelf products, the main structure of the main site. The top plate, the upright post, the laminated board, the hanging plate, the file Book strip, the dust proof board, the sealing strip, etc., the column and the site adopt the jack hole method and are fastened by bolts, and the fixing method makes the frame body extremely firm. The plate is divided into two parts, and a book bar is arranged in the middle of the frame, and the side plate is a concave convex type pressing process, which is formed at one time with smooth lines and strong stereo feeling.