Home > categories > Machinery & Equipment > Forklifts > What are the traffic rules for forklifts
Question:

What are the traffic rules for forklifts

What are the traffic rules for forklifts

Answer:

Safety regulations for forklift trucks The head of the facility shall strictly require the personnel who have received the training and obtaining the certificate to drive the forklift truck. 2. The forklift driver to use checklist to check before, during, and after using forklifts, including all alarm and safety device (see chart), and immediately report to the supervision of a forklift any failure situation; If there is a problem with the brake, you may not use a forklift truck. The trailer or truck for loading and unloading should be put on the brakes and stuck in a block to prevent the car from sliding. Only carry items within the capacity of the forklift. The lifting of the weight is low, and the fork is not more than 8 inches off the ground and leans back. Make sure the load is stable and not tip over when turning.
Fork work basket - cannot allow personnel to stand on a fork unless there is a special basket for forklift. When people are in the basket, the forklift cannot be exercised. The standard is that forklift must die on the brake, the engine turns and the driver is on the table. The driver cannot turn off the forklift and leave the forklift while using the staff work basket. 8. The stability of the forklift truck triangle - if you will forklift lifted up, you can see forklift from the bottom of the forklift truck is in front of the support of two wheels, and after two rounds of connection points in the middle. If you wire up three points, you get a triangle. This is the stable triangle of forklift. As long as the center of the forklift is in the stable triangle, the forklift does not tip over.
The center of gravity of the cargo - the front wheel of the forklift truck is the anchor point for the weight of the forklift and the weight of the cargo. If the goods and the weight of the forklift truck, and the focus of front wheel to the respective distance and fairly, the forklift front wheel will play the role of a seesaw strong point. If the loading of the goods to support the weight of the goods distance of the distance is far, will make the forklift and the weight of the goods is transferred to the outside of the front wheel, is likely to result in forklift truck overturned. Of course, on the other hand, if the goods to the center of gravity of the near point, will make the whole center of gravity of the forklift and goods in the back of strong point, at that time, there is no risk of forklift truck overturned

Share to: