Home > categories > Transportation > Truck Tire > What are the tyres for the tyres?
Question:

What are the tyres for the tyres?

What are the tyres for the tyres?

Answer:

Truck tyres can be adjusted by the following methods:(1) adjusting tire pressure. Tire pressure is too high or too low, will cause uneven wear of tires, tires caused by "eating tires" phenomenon. When the tire pressure is too low, the tires bend inward, which can cause severe wear on the edges of the tire. If the tire pressure is too high, the middle part of the tread will be worn faster. Therefore, pay attention to the normal tire pressure at all times. It is better to inflate the tire pressure according to the lower angle of the car door.(2) make the wheel dynamic balance regularly. If too many tires, or feeling a swing, to timely tire dynamic balance testing, to see whether there is a problem if the tire tire, found that the imbalance and other issues, to lead the installation of the balance to maintain a balance, so as to avoid the occurrence of "eat fetal" phenomenon.(3) pay attention to the maintenance and transposition of tires. The general vehicle every 5000 kilometers, the need for transposition tires, with diagonal tire change is better, so the normal maintenance of tires, can let the tire wear uniform, can effectively prolong the life of tire.(4) make four wheel alignment regularly. A regular four wheel alignment, can enhance driving comfort, reduce fuel consumption, avoid the tire "eat tire", increase the service life of the tire, ensure the stability of the vehicle straight, lower chassis suspension parts wear, so try to regularly go to the 4S shop or repair factory of professional orientation, in general, at least every suggestion once a year or ten thousand km tire positioning, a positioning. If the car takes a long time, like taxis, trucks and the like, the best half a year or three months to do a location.
Causes of tire tread:(1) four wheel positioning is not accurate: causing four tires not in standard requirements of the two horizontal line, then the 2 wheels of the same side will eat fetal phenomenon in the run up, or front or rear wheels, the vehicle is mainly do not go straight to correction, resulting in a part of a tire the abnormal increase of accelerated wear friction.(2) the adjustment of the front beam is inaccurate, and it also causes the fetus to be eaten. An angle beam is inclined slightly to the front wheel inside, like the character, this is the best point of high speed and stable driving, all cars have a toe angle, this angle did not adjust well will eat with the first child, truth.(3) steering machine failure will cause eating tires deviation and so on.(4) the crossbeam is not smooth and the shape will also cause the fetus to eat; for example, some accidents cause the car to eat the tire because it is deformed.(5) the pressure difference of each tire is too large will have different specifications of the tire; tire loading will eat tire.
Tyres are simply an abnormal acceleration wear on one or more of the inside or outside of the tyres, which is worn more quickly than part of a tire. When checking the tires, it is obvious that the pattern is worn faster than the other tyres or on the other side of the same tire, which soon results in partial wear, resulting in the tire being scrapped.

Share to: