What do you have to do when you have a full-body tool and a welding tool
Regular blade grinding die not only increases the life of the die, but also improves the service life of the machine, so it is very important to master the correct and reasonable time. Mould need grinding for users is direct approach is: after punching accumulated to a certain number of times, to check whether there is larger burr punching quality produce, check whether the die cutting edge rounded corners on (rounded corners p RO. 1), whether gloss disappear, if you have this kind of circumstance happening, illustrate the punch is dull, at this point needs sharpening. Die if grinding at the appropriate time, 3 times can prolong service life, but not the correct grinding, instead will increase sharply mold edge damage, reduce its service life, mold has its form a complete set of mold grinding machine, grinding, choose the appropriate grinding machine will be greatly convenient for the user, improve production efficiency.
Tool sharpening is a means to restore the sharp cutting edge by grinding. When the cutting edge is worn to a certain extent, the original sharp edge becomes blunt, causing the shock to be too big, and the size and position accuracy is reduced. Therefore, the die must be sharpened to restore its sharp cutting edge. To reduce the cutting and size and shape deviation, improve the surface quality of the forming parts. ?
A full-body tool is usually a high speed steel tool, which is a kind of material. The welding tool, the head of the knife and the material of the knife body. When you're blunt, you can polish off the wine
It is not only a full-body tool and a welding tool, but it is also organic, not heavy and not heavy. A full-body lathe, welded tool and machine tool, which can be worn with a dull, grinding condition. No heavy grinding and no heavy coating cutter. When blunt, switch the tip of the knife or switch the blade.
A full-body lathe, welded tool and machine tool, which can be worn with a dull, grinding condition.
