What fire prevention measures in the process of rolling aluminum foil?
5. Breaking with a protection device should be sensitive and effective, billet aluminum foil thickness should be uniform, it does not allow the plug to avoid a lot of sudden thickening material phenomenon. In operation, at the end of the roll should be appropriate to reduce the speed of the mill.
4. In the oil vapor place, explosion-proof electrical equipment must be used, after removing the crane spreader spreader should be promptly cut off the power supply.
3. Strengthen inner roller, bearing inspection and management of each roll change should be checked for defective parts be repaired and replaced. Bearing box installation tightness should be moderate to avoid roll neck and bearing sleeve relative movement.
2, to strengthen inspection and inspection work rolls, support rolls, guide rolls mist lubrication system to ensure that oil mist generator oil level, oil pressure, air pressure and temperature to meet the requirements, the connecting pipe with mist generator bearing box It should be smooth to provide adequate lubrication. Adverse mist lubrication is one of the main causes of the most fire mill, in production, to deal with oil mist lubrication system key management, identify problems in time to stop treatment.
1, high-speed aluminum foil rolling, rolling mill produces around high concentrations of oil vapor is difficult to avoid, in order to minimize the concentration of oil vapor, smoke should ensure the normal operation of the device, and make maximum exhaust volume.
