What if the floor is slippery when the floor mat is removed?
Prevent the installation of ground heating, so that the floor contraction1, the first use or long time not opened, the use of geothermal heating, should be set to the minimum temperature, and then slowly heating up, it is best to raise about 1 degrees per hour is appropriate, so that the wood floor gradually adapt to the temperature rise. If heating too fast, it is possible to cause wood floors heating too fast, resulting in instability, distortion, cracking changes, affecting the wooden floor service life.2, in the geothermal heating wood floor as far as possible not to make fixed decoration or put no leg furniture, to prevent local heat dissipation is not smooth, the heat is stuffy in the wood floor, easy to produce floor because of uneven heating deformation.
Some problems in material selection include floor heating and floor shrinkage. How can we prevent such a situation from occurring?The first case is the quality of the floor itself is not good, without strict drying treatment (water content should be less than 20%), resulting in moisture content is too high, after use, with the reduction of moisture content, wood contraction, cracks. In fact, this kind of floor, that is, the use of heating in the interior is not the same, the same will crack.The second case is the premature filling of the wooden floor when the filling layer is not completely dry. Because the wood floor is paved, the moisture content in the concrete is still evaporating, which makes the moisture content of the dry wooden floor rise and swell.
