overrun clutch solenoid valve dtc definitions code P1760
Description The overrun clutch solenoid valve is activated by the TCM in response to signals sent from the park/neutral position (PNP) switch, overdrive control switch, vehicle speed and throttle position Will then be controlled. TCM TERMINALS AND REFERENCE VALUE ON BOARD DIAGNOSIS LOGIC Diagnostic trouble code O/R CLTCH SOL/CIRC with CONSULT-II or P1760 without CONSULT-II is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve. POSSIBLE CAUSE Check the following items. Harness or connectors (The solenoid circuit is open or shorted.) Overrun clutch solenoid valve DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE has been previously conducted, always turn ignition switch OFF and wait at least 5 seconds before conducting the next test. TESTING CONDITION: Always drive vehicle on a level road to improve accuracy of test. After the repair, perform the following procedure to confirm the malfunction is eliminated. WITH CONSULT-II Turn ignition switch ON and select DATA MONITOR mode for `ENGINE with CONSULT-II. Start engine. Accelerate vehicle to a speed of more than 10 km/h (6 MPH) with D position (O/D ON). Release accelerator pedal completely with D position (O/D OFF). WITH GST Follow the procedure With CONSULT-II. WIRING DIAGRAM - AT - ORVCSV Diagnostic Procedure 1: CHECK VALVE RESISTANCE 2: CHECK VALVE OPERATION 3: CHECK POWER SOURCE CIRCUIT 4: CHECK DTC 5: CHECK TCM INSPECTION This isn't something you want to do in your driveway. Take it to a decent mechanic and they should have it knocked out in about an hour or less, if it's the same one I'm thinking of.
