What is the difference between a step motor and a 2380v
Add a second, 220v motor to determine the positive and opposite direction of the capacitor, and 380v to reverse the two lines.
One is the factory voltage, the other is the family voltage, and the voltage in the work place is different to take a bath
Stepper motor end using the pulse constant current source, the input ac just provide energy, 380 v input is smaller than 220 v input current is commonly used in big torque stepper motor drives. Suppose A 24 n. M stepper motor power of about 750 w, then using the 220 v power supply drive ac input current = 750/220 = 3.4 A, if you are using A 380 v power supply current = 1.732/750/380 = 1.14 A. That's the difference.
The voltage between one and 380v is the voltage between two phase lines, which is used in large capacity, such as power demand. The voltage of 220v is a voltage difference between a phase line and a zero line, which is normally used in lighting and small electrical appliances. 2, 380 is generally suitable for control of the three-phase motor do not allow the lacks of the electrical equipment, such as, generally take A, C phase. There lacks open phase fault is two-thirds of the magnet release. To find fault easily electricity pen; 220 control is generally suitable for single charge. Multiple sharing. Load and control are not connected. Voltage (voltage), also known as a voltage difference or a potential difference, is a measure of the amount of energy produced by different electrical potential in the electrostatic field. The magnitude is equal to the amount of work done by the positive charge from point A to point B by the force of the electric field, and the direction of the voltage is defined as the direction from the high potential to the low potential. The international unit of voltage is volt (V), and the usual unit is millivolt (mV), microvolt (mu V), kilovolt (kV), etc.
