What is the gas in the two pneumatic combination?
Now most of the cylinder, valve generally in the pneumatic components of the pre sliding parts parts into the semi-solid grease like (or paste oil) called non oil components. Therefore, there is no need to provide oil mist lubrication in such pneumatic transmission. If the oil mist lubrication to non oil pneumatic components, not only has no meaning, and semi solid lubricating grease is very thin oil mist and oil slowly dilute the sealed gas loss is bad. If oil mist has been supplied, keep it up.
GB brand: 7 mechanical lubricants (viscosity about 7E degrees) is also a relatively convenient choice. The oil mist can be ejected into the pipeline about 2M or so. And after the oil mist lubrication, it will be discharged with the valve, not in the cylinder memory.
Pneumatic two piece is a filter, decompression, oil mist, the compressed air purification for the integration of two devices. The oil in the oil mist filler is: turbine oil No. 1, (International Brand: ISO, VG32), which has a very thin viscosity of about 7E degrees, lubricating oil (equivalent to 5E ~7E degrees of sewing machine oil)
