What is the synthetic process of the car tires and what is the manufacturing process?
Tire common classification is divided according to the structure for the bias line tires, radial tires. The fundamental difference between a radial tire and an oblique line tire is the carcass. The carcass of the oblique line tires is a sloping ply; and the carcass of the radial tire is a polymer multilayer crossover material with a top layer of steel striped cloth made of steel wire to reduce the tires The odds.
Mixing process is to carbon black, natural / synthetic rubber, oil, additives, accelerators and other raw materials mixed together, in the mixer for processing, to produce "rubber" process. All raw materials must be tested before being released before they can be used. The weight of the mixer is about 250 kg. The rubber used in each of the rubber parts of the tire is of a specific performance. The composition of the compound depends on the tire performance requirements. At the same time, changes in the composition of the compound also depends on the supporting manufacturers and the market demand, these needs mainly from the traction, driving performance, road conditions and tire requirements. All of the compounds in the next process - glue parts before the preparation process, must be tested, was released before entering the next process.
