What material of stainless steel screws is not easy to strip?
Aiming at this problem to strip stainless steel screw screw. Not just as simple as the customer thinks, producing screws by changing the screws and wires of the material. Although this is a better solution. But we still have to analyze and analyze. To find out the reason for the screw tooth, then an antidote against the disease.
The most can only reach 4.8, and some 4.8 can not reach. High customer demand, it can only use screws, wire rod, screw material a little better. For example, 1018, 10B211022 and so on, to produce the production of 8.8 screws. By hardening it, the screw hardness reaches 8.8.
If stainless steel screws easily slip teeth, there may be no hard, if only through hard will solve the questions, that don't have to change what material. And if it is in the device using the screw, the force is too large so that the adjustment screw form, good strength. If it is not, then you can only directly replace the screw material, change a little better. Faced with screws, wire 1010, base to 1006 screws, wire produced screws, then the wire produced by their own screw hardness is not so good
