What is the depth of the pile? What is the principle of hydraulic pile?
Piling is a reliable foundation for the house. The depth of pile driving is considered as the control standard after entering the bearing stratum.
When the bearing capacity of the foundation is not enough, it is not suitable for the direct excavation of the ground (such as quicksand, silt, marshes, etc.) using piling. Aimed at:Reinforce the soil and transfer the load to ensure that the superstructure will not be deformed or damaged due to uneven settlement of the foundation.Pile shape: pile, steel pile, cement pile, reinforced concrete pile and so on;The stress forms of the pile are end bearing pile, friction pile and mixed pile;Pile depth: sufficient to withstand the pressure of the superstructure, without deformation, according to the design life of the building: (permanent, short, temporary)Usually to the design bearing layer;The principle of hydraulic pile: the stake is carried to the bearing layer by the hydraulic press.The above answer, I hope you will be satisfied.
If you put a flagpole on a sand pile, you want to keep the flagpole stronger and stand longer. You can also make a large and sturdy bottom support, but the most economical and convenient way is to insert the flagpole as deep as possible into the sand pile. The effect of piling is similar. A building will function on the ground for a number of years, while the ground will cause a series of changes such as soil loosening and ground movement due to groundwater and other reasons. Of course, if the ground layer is very deep, then there is no need to do so at the stony base, nor is it economical. The depth of pile driving shall be related to the soil layer and the building structure! The hydraulic hammer pile driver, with the hydraulic pressure as the power, can adjust the hydraulic pressure according to the formation soil quality to achieve the appropriate impact force for piling. It is a new type of pile driver.
There are many kinds of piles, such as powder jet pile, which is the foundation pit support; the engineering pile is to improve the bearing capacity of the foundation............The depth of pile driving is related to many factors, such as underground bearing stratum and ground loadThe principle of hydraulic pile is simply to press the pile into the ground by hydraulic principle
The effect of pile driving improves the bearing capacity of foundation. There are many kinds of piles, such as lime soil compaction piles, cast-in-place piles, friction piles, etc., the form and the name are all many, the purpose is to let the building have a stable foundation, and avoid the later settlement and so on.The depth of the pile is determined in terms of the condition and depth of the supporting layer and the condition of the proposed building.The hydraulic pile simply means to press the pile into the ground using the hydraulic principle. Hydraulic pressure is the means, no matter what process is adopted, the purpose is to improve the bearing capacity of the foundation.
