What's the difference between a clip on handle butterfly valve and a turbo butterfly valve? Where are they used?
Just drive differently,Handle butterfly valve is generally small caliber, because generally small caliber torque smaller, can be directly opened and closed by handTurbine butterfly gear box drive stem rotation.The selection principle for when the stem torque is greater than 300N.M when used in gear box drive gear box, and use the handwheel control hand wheel force is not greater than 300 nm.
Depending on the size of the valve and the opening and closing torque, the transmission mode is different (handle or turbine).
1, the drive mode is different (handle or turbine), mainly based on the size of the valve and the opening and closing torque to decide.2. The butterfly plate of the worm valve is installed in the direction of the diameter of the pipe. In the butterfly valve body cylindrical channel, the disc shaped butterfly plate revolves around the axis, the rotation angle is 0 degrees ~90 degrees between, when rotates to 90 degrees, the valve opens the card completely.3, clip type butterfly valve is to use double headed bolts to connect the valve between the two pipe flanges, flange butterfly valve is a valve with a flange, bolt with the valve flange at both ends connected to the pipe flange.
