This morning, when I turned on the computer, the monitor went on and on. It was not the flash of the indicator, but the flash of the screen. And a little flower screen. I checked the connection between the power and the video card. It should be all right. After about 1 minutes or so, it doesn't flash. It seems normal. Also, the screen looks very dark when the monitor flashes. Is it damp? The monitor is the new new computer that has been around for more than 1 months.
High pressure liquid crystal display panel output is not stable, the screen has been flashing, recommended repair
Monitor power problem. Check filter capacitor.If it's a video card problem, it won't be this way.
You can call the monitor manufacturers, I have encountered, is a fault display, after the repair recovery. I hope this is not a monitor fault. Another: graphics card failure may also produce such a phenomenon. Suggest, if conditional, can think of a way to change a monitor, test whether video card fault. For example, you double headed output, then display the output to the TV to see if it will blink. Will flash, that is, graphics card failure, will not flash, and that may be the largest display line and display, if you can exclude the display line failure, you can be judged as a display fault.
The reason why the LCD does not stop flashing:First, the low screen refresh rate: open the display properties panel, click Advanced, and then select the monitor column and then to the inside of the "only display support maximum refresh rate" in the box next to the point right, then click the refresh rate of the marquee, the highest frequency can choose inside.Second, electromagnetic interference display: next to what is a large electrical appliances, or degaussing sound speakers, such electrical appliances will interfere with the electromagnetic display, so that the monitor away from this type of electrical interference can.Third, monitor aging fault: the two kinds of methods can not solve the case, the monitor may be aging or failure, the best repair.
