What shall I do if the tape measure can not be taken back after completely pulling out?
10 meters of steel tape measure can easily cause this kind of problem. The 10 meter long scroll tape footage to shell, wrapped around 80 laps, the limited space of the scroll spring load greatly. Once the belt is not recycled, the short term (3 days) can be exchanged with the retailer. If you buy more than a week, you can simply scrap it and buy a new one.
Tape, open circles, manual. If the tape is not, buy a cheap, anyway.Beg for adoption
The tape measure will not come back after pulling out completely1, open the tape measure, first the wire in accordance with the picture sequence winding, and then plug in, the outer head to around the white part of a circle embedded inside.2. The wire is stuffed. Turn to the back and cover the tape head into the groove.3. Turn the ruler from left to right.4, take the paper clip hook at the bottom of the wire, the fingers to hold the rolled up on the back of the wire and tape.5, to help to hook the wire clip on the shell of the "I" type.6 and then push the button and spring into the blue groove.7, then, cover the shell, complete the tape, pull out, you can recover.
