Home > categories > Security & Protection > Lock Parts > What would be a good fishing rod and wheel for bass fishing?
Question:

What would be a good fishing rod and wheel for bass fishing?

I'm not a crazy fisher, so i don't want to spend over $100. i need an affordable and durable rod/wheel that won't cost me and arm and a leg.

Answer:

If you are a Christian or have a Christian friend, pray over the lock. It will stop.
this energy knows that u don't believe in such things so it will work a little harder to get your attention..it sounds harmless but still don't trust it. get your home blessed. god bless
The hardness of the wheels will let you know if they're indoor or outdoor wheels. Outdoor wheels are squishier than indoor. You can use indoor wheels outside if they're soft enough, but they'll catch on any debris you roll over. The ABEC 1 you found is the rating of the bearings inside the wheels, not actually part of the wheel itself.
A carburetor engine would not be my choice for turbo charging. But a draw thru system would not be that hard to do. Which is what you are limited to unless you can get a box for the carburetor that will keep an air charge. Until the carburetor can be made air tight you can not use an inter-cooler. The turbocharger has to be mounted to the intake manifold directly under the carburetor. If you can afford an after-market fuel injection system (such as Mega Squirt) then you can go ahead and do a full turbo system with inter-cooler. There are other fuel systems that might work off the shelf, I just don't have the time to do the research. Maybe some on in the RX7 forum has.
If it's a ghost, it does it to get your attention which it has. Check into the type lock it is, could it be some lose parts within? that is where though, Could just be a spirit, I don't believe it's bad, sounds more protective than anything.

Share to: