When laying solid wood flooring how much loss rate is normal?
One: the normal loss is about 3% (error 1%), which is 2% -4%, the national standard is 5% -10% (actually the floor to protect the floor manufacturers to protect the loss), home area is small, as long as you carefully Point floor wear can be calculated, such as home floor is 40 square meters, loss of 2 square meters is enough. Second: the baseboard meters and floor area figures are the same (such as the floor is 42 square feet, the base line is 42 meters). Three: 1) If it is a small room so every door must have a bridge, but not necessarily copper (now basically no), the color of the bridge and the floor color to close, the color is too yellow bar. 2) If it is Siamese do not have a bridge, the continuity of the floor damage, the overall effect is not good. Four: the floor is very important to install, the master of the decision to use your home floor effect and life.
Mainly look at the length and width of your house and the width of the floor and the length of the floor and the material, such as your house long 3.64 * 1.22 you buy 910 * 122 board a little waste no ah understand my meaning!
Solid wood flooring is about 3% of the normal loss (error 1% of the top of the flower), which is 2% -4%, the national standard is 5% -10% (actually the floor of the floor to protect the floor manufacturers loss)
Normal in about five percent.
