How to do the anti-corrosion wood cracking
We need to pre-processing and post-maintenance, in the pre-treatment, we can give enough time to dry wood, or drying with a drying kiln to reduce the moisture content of wood, this method can greatly reduce the probability of cracking of wood, but , Timber production cycle is longer, higher cost. After the production of anti-corrosion wood products, should be timely brushing wood oil to maintain moisture. In the latter part of the maintenance, especially for outdoor anti-corrosion wood products, they suffer from the wind, sun, rain, more prone to cracking, deformation of the problem, which requires our observation and timely maintenance, in the emergence of cracking Of the time, with marble glue to fill, and then brush a layer of wood oil, you can effectively lock the wood within the water, thereby reducing the occurrence of cracking and other phenomena.
All in all, anti-corrosion wood products are due to internal and external moisture imbalance caused by, so the method can balance the moisture inside and outside the wood can crack on the wood played a very good delay effect. So, in the anti-corrosion wood products to bring you comfort and warmth, do not forget to maintain it, to extend its life, to create a beautiful and harmonious nature!
Finish the wood project a total of the best brush on the wood immediately, and then use the film bag to prevent the loss of water, the bigger the more easy to crack the stigma ~
With marble glue and putty will open cracks fill, and then brush the oil on it