Home > categories > Mechanical Parts & Fabrication Services > Valves > where is the location of the iac valve, 97 galant?
Question:

where is the location of the iac valve, 97 galant?

where on the motor is the valves location

Answer:

The idle air control valve can be found under the throttle body. In order to get to it: 1. Disconnect negative battery cable. 2. Remove air intake from throttle body. 3. Disconnect throttle body cable. 4. Disconnect sensor connectors from IAC valve, and throttle position sensor. 5. Remove 4 bolts from throttle body using 10mm socket wrench. 6. Take throttle body, turn bottom side up, remove 4 mounting screws from IAC Once you do that you have removed the IAC. Reverse the steps to put it back on starting at number 6 and working your way back to number one How do you replace an air idle control valve? Replacing an idle control valve can be a daunting task. For your specific application, we recommend to ask in our car forum for advice. Here we will describe the basic process for replacing your idle control valve. Please note that for different cars and trucks the process will not be the same. Steps to replace your idle control valve You will want to begin by first gaining access to the idle control valve. In order to do this you will need to remove the air filter assembly, along with the air mass sensor and the air mass meter boot. Once you remove this whole assembly, you should have easy access to the throttle body. Remove the four bolts that secure the throttle body to the intake manifold. Usually on the bottom of the throttle body, on fuel injected cars, there is a idle control valve. To remove the old valve, simply unscrew or unbolt it. Bolt on the new valve, and reinstall everything. Make sure you replace your throttle body gasket at this time.

Share to: