Which is good for low voltage lamp belts 5050 and 3014?
Controller connection: LED marquee belt and RGB lantern with all need to use the controller to achieve change effect, and control distance of each controller is not the same. Generally speaking, the control distance of the simple controller is 10~15 meters, the distance of the remote controller is 15~20 meters, and the longest can be controlled to 30 meters distance. If the length of the LED band is longer and the controller cannot control the length of the band, then the power amplifier will be used to tap it.
Power connection method: LED lamp belt voltage is 12V DC, so it needs to use switch power supply, the power supply size according to the power of LED lamp belt and connection length to decide. If you do not want to take each LED lamp with a power to control, switching power supply can buy a relatively large power for the total power supply, then put all LED light with all input power in parallel (wire size is not enough, also extended) unified by the total power switch. The advantage is that it can be centrally controlled, which is not convenient. It can not be achieved with the lighting effect and switch control of a single LED light band, which can be measured by itself.
1, indoor installation: LED lights for indoor decoration, because of not having to undergo the installation is very simple so exposed to wind and rain. The LED lamp Guanghong electronic production zone as an example, behind each LED lamp belt are affixed with self-adhesive 3M double-sided adhesive, the installation can be directly off the surface of the 3M double-sided adhesive stickers, and then the lamp strip is fixed on the installation place, by hand press flat on the line. If some places need a corner or a long range, simply put the LED band into 3 groups of LED in series and parallel form, because every 3 LED can be cut and used separately.2, outdoor installation: outdoor installation due to withstand wind and rain, if using 3M glue to fix, a long time will cause the decrease of the 3M adhesive LED lights off, so often used for outdoor installation fixed card slot, need to cut and connected place, method and indoor installation, but also need to equipped with waterproof glue, waterproof effect to consolidate the connection point.
Light has been widely used in buildings, bridges, roads, gardens, courtyards, floor, ceiling, furniture, cars, ponds, water, advertising, signs, signs and other fields, used for decoration or lighting, for all kinds of festivals, such as Christmas, Easter, Halloween, Valentine's day, National Day adds joy and etc. the festive atmosphere of infinite, it entered into advertising, decoration, construction, commercial, gift five advantages market with strong vitality, and exported to Japan, Europe, Australia and other countries and regions. Is widely used in building body contour, bridges, guardrail, hotel, ballroom, Lin Yuan, advertisement decoration place etc..
Choosing 5050 or 3014 does not have much effect on the bandThe quality of the light belt is judged mainly by the chip, plate, brightness, heat dissipation and service life.