Who knows how big transformers and lines the 36V transformer uses in lighting?
380V-220V/36V transformers, commonly known as safety transformers or line transformers, are mainly used for lighting in shop equipment and mobile lighting for inspection and maintenance. Their power is 50W, 100W, 200W, 300W., and their line size is determined by power!
The sectional area of the wire can be calculated according to the electric power formula. The current required by the wire is calculated, and then the reference to the national standard "500 volt copper core insulated wire, long term continuous load allowable ampacity meter" is selected.
How many transformers should be used in the lighting of the 36V transformer, which should be chosen according to the power required. The greater the load (power), the greater the power to select the transformer.
Depending on your load capacity, primary voltage, site reservation, etc.. For example, 3.6KW lighting, with 4KVA transformers, the primary side 380V with 2.5 square (copper wire) enough, two times the side of 25 square.
No matter how many volts the output / input voltage of the transformer is, the size and the amount of the core of the transformer, the wire diameter of the winding lead and the lead thickness must be determined by the transformer capacity. Example: input 220V, output 36V load is 36v/40w light bulb 6, so the primary needs 0.72, secondary use 1.81 diameter enameled wire winding system. The transformer capacity is about 250VA.
