Why does my kitchen cabinet door edge strip fall off, and the base board is particle board?
What you call a particle board is what we usually call a shaving board. Generally, the edge of the shaving board is made of PVC sealing strip, and the main function is beautiful, and the moisture and moisture inside the board are contacted and damp, and the chemical gas overflow of the sheet can also be prevented. Edge off the following main reasons: 1. environmental problems caused by high temperature and high humidity; 2. furniture manufacturing when edge glue coating is not uniform; the 3. furniture manufacturing when edge strength is not enough, not pressed; 4. edge gum gum quality, too thin, too little or not uniform, resulting in 5. edge glue quality degumming; no, cause degumming; 6. furniture manufacturing, sealing machine temperature regulation, lead edge glue melting is not ideal. Generally determine the reasons, the edge of the strip will be removed from the back to observe, for your reference, hope to adopt.
What material did you choose when you made the plate? If it doesn't fit the material you bought at the moment, you can find a business.
The board is that particle board plate is melamine plate, commonly known as "particleboard, particleboard with PVC edge banding in general, the main role is to prevent moisture and appearance, internal contact sheet after sheet can prevent moisture, chemical gas overflow.There are several reasons for banding off:1. environmental problems caused by high temperature and high humidity;2., furniture manufacturing, edge coating coating uneven;3. furniture manufacturing, edge strength is not enough, not compressed;4. edge gum gum quality not too thin, too little or not uniform, resulting in degumming;5., edge glue quality does not work, cause degumming;6. furniture manufacturing, the edge sealing machine temperature is not adjusted well, resulting in edge melt melting is not ideal.The general judgment of reason, the edge will be torn off the back of observation, if there is no rubber plate, rubber sealing strip, not a layer of white or nearly transparent color is the edge sealing strip on the back, yellow gum coating, usually gum edge problem;Or no glue on the board, but there is glue on the edge banding. It is improper operation during manufacture or the quality of edge sealing adhesive;Simple solution: use blower to align the edge strip to blow hot air. When the back glue is soft or melted, press the edge banding on the original position. After a few minutes cool down, loosen again.
