The cars heating control is stuck on vent. No matter what selection I put it on (heat,defrost, heat/defrost etc:)After replacing the htr control switch and finding out that was not the problem. I found a broken vaccum line. After replacing the the bad section of line. I was able to turn on the defroster, heater, etc. I thought the problem was fixed. A few hours later I started the car and the heat control was again stuck on vent. Now im right back to square 1. Any Ideas on what the problem could be would be greatly appreciated. Thanks in advance!!
use magic earsers they work so good i promise this wont fail good luck
There are so many brands and models of smoke detectors and I'm not familiar with any brand names. All the detectors I have been exposed to have had a test button that when pushed would go into a system check sequence followed by the alarm [very loud] for 30 seconds or so [I never put a stopwatch on it] and turned off by itself. My understanding is that each time you press the test button starts the self check sequence and the alarm sequence all over again.
