A computer can't turn off the machine, unless it closes. How to solve it?
Shutdown process and cause of troubleWindows shutdown procedures in the process of the implementation of the shutdown function: complete all disk write operation, remove the disk cache, close window procedure, close all currently running programs, all protected mode drivers into a real mode.The main reason causing Windows system shutdown failure: opt out Windows sound file damage; incorrect configuration or hardware damage; the setting is not compatible with BIOS; BIOS in the "advanced power management" or "advanced configuration and power interface" is not appropriate; not in real mode for video card distribution a IRQ; a TSR program or program may not be properly closed; loading an incompatible, damaged or conflicting device driver etc..
Attention to advanced power management"The advanced power management (APM) function on the computer can also cause shutdown, crash or blank screen problems. To determine whether APM causes a shutdown problem, click Start > Settings > control panel, and then double-click the system". On the device manager tab, double-click the system device". Double click the advanced power management list in the device list, click the Settings tab, and then click to clear the enable power management check box. Click OK until you return the control panel". Restart computer. Shut down the computer. If the computer shuts down properly, the problem may lie in the APM.
Quick shutdown is not normalThe fast shutdown is a new feature in Windows 98, which can greatly reduce the shutdown time. However, this function is incompatible with some hardware and may cause the computer to stop responding if the hardware is installed in the computer. You can disable the quick shutdown. First click start, run, then type Msconfig in the open box, and then click OK (see Figure 1). Click Advanced, disable fast shutdown, click OK, and then click ok". The system prompts to restart the computer and restart it. If the computer shuts down properly, the fast shutdown function may not be compatible with one or more hardware devices installed on the computer.
Sound file corrupted when exiting WindowsFirst, you can make sure that the "Windows" sound file has been destroyed - click Start > Settings > control panel, and then double-click the sound". In the event box, click exit Windows". In the name, click '(no)', and then click OK, and then turn off the computer. If the Windows is shut down, the problem is caused by the exit sound file, in order to solve this problem, please select the following an operation: restore sound files from backup; re install provide sound files; configure Windows to not play "exit Windows" sound file.
Startup shutdown faultWhen you use the computer, you will often encounter the "Windows" just started, it shows "you can safely turn off the computer", or start immediately shutdown or restart when the shutdown and other failures. The cause of such failures is generally caused by damage to the Wininit.exe or Vmm32.vxd files. The solution is to retrieve the two files from the Windows installer compression package again. Go to the Windows\system subdirectory, rename Vmm32.vxd to Vmm32.XXX, and then click "start", "program", "attachment", "system tool", "system information", and "system tool"". Click the menu bar and then select "tools", "system file checker, click to extract a file from disk" (see Figure 2), and then on the file to extract "box" Wininit.exe "or" Vmm32.vxd". Click start, and then follow the onscreen prompts, to CD-ROM or from the Windows installation disk to extract files to the C:\Windows\System folder, and then repeat this step to replace the file Wininit.exe or Vmm32.vxd.
