Automatic water softener can not absorb normal salt water, what should I do?
E. the inside of the valve is leaking, and sometimes the leakage of the control valve will cause no salt. At this point, you need to check the valve body or replace the control valve, to ensure that water softener normal salt absorption.F. waste water pipe is clogged with waste water pipe, that is, the sewage pipe. When the sewage is blocked, the waste water can not be drained out, resulting in the entire suction and drainage is not smooth, and naturally it can not continue to absorb salt.G. water distributor up and down, clean up and down water distributor, Changsha bin Rui water treatment, experienced water treatment plant, for you to solve all kinds of water treatment problems. Call when necessary
C. salt suction pipe leakage, when the salt suction pipeline leakage occurs, the pipe into the air, resulting in no pressure, etc., will also lead to non smoking. Like a tire leak, the pipe needs to be replaced.D. jet is damaged or blocked check or replace the jet.
Water softener does not attract salt, control valve is generally a problem. There are generally several reasons.A, the inlet pressure is too low, the inlet pressure is too low, need to increase the inlet pressure, loading pressure gauge.B, salt suction pipe blocked, water softener does not attract salt, may be the control valve, inlet pipe or other pipe is blocked, carefully check the pipeline, check whether there is plug, clear the plug.
