Home > categories > Home Appliances > Water Softeners > What is the working principle of the fully automatic water softener?
Question:

What is the working principle of the fully automatic water softener?

What is the working principle of the fully automatic water softener?

Answer:

The hardness of water consists mainly of cations: calcium (Ca2+) and magnesium (Mg2+) ions. When the hardness of the resin layer containing the raw water through the exchanger, water calcium and magnesium ions adsorbed by the resin, while the release of sodium ion exchanger, so the outflow of water is to remove the hardness ions in softened water, when calcium and magnesium ions adsorption resin reaches a certain saturation, water hardness increased, the water softener automatic regeneration failure resin according to the predetermined procedures, the use of higher concentrations of Sodium Chloride Solution (saline) through the resin, the resin so that failure to restore sodium type resin.
Working principleThe hydraulic control valve uses the kinetic energy of the flow to drive the two groups of turbines, respectively, to drive two sets of gears to push the rotation of the water meter and the control panel. The cumulative water meter disc flow through control panel will be the raw water pressure signal through a set of channels by introducing a set of valve chamber, while rotating according to set rules to open or close the pore pressure, so as to realize the automatic switch integrated in one of a set of valves.
Working principle:The automatic water softener adopts the principle of ion exchange to remove the scaling ions such as calcium and magnesium in water. When the raw water containing hardness ions through the exchanger resin layer, the sodium ion water calcium and magnesium ions with resin adsorption replacement, resin adsorption of calcium and magnesium ions and sodium ions in the water, this switch from the outflow of water is removed by the Ruanhuashui hardness.
The QC-RST series consists of two water softener resin tank (main tank and auxiliary tank) hydraulic control valve, the salt box is composed of three parts, control valve to control the switch between the main water tank and the auxiliary tank, to ensure that there is always a pot in the work of the state, and another tank is in standby state or regeneration, regeneration by salt solution the valve installed Venturi injector suction, regeneration and cleaning water softening water is another tank. For different raw water hardness, equipped with different numbers of water disk to achieve the corresponding work and regeneration cycle.

Share to: