because and im 14 years old and just got done and suffer from severe chronic migraines soo can it back fire on me? please help! :? I personally dont want it to back fire soo please help!
No. To an inertial observer a relativistic object has increased mass, slower time passage, and either Terrell rotates (if passing by) or shrinks to flatten (if coming at the observer's nose). The scale factor is beta sqrt[1 - (v^2)/(c^2)] where v is the observed velocity and c is lightspeed. The reference frame that travels through the most space has the least time accumulated. There is **no** gravitation within Special Relativity. Special Relativity is a subset of General Relativity that includes gravitation.
This is a potentially dangerous situation! A natural gas furnace should never discharge flue gasses into a masonry chimney unless there is a metal liner installed from top to bottom and connected directly to the furnace. There are two reasons for this. 1. The products of combustion from natural gas appliances contain corrosive gasses which will condense as they rise in the chimney and will cause the brick and mortar to turn to powder. This is what you found when you cleaned the chimney and eventually it will completely destroy your chimney. 2. Most masonry chimneys are much too large in diameter to allow an effective draft to be maintained. Without a proper draft the flue gasses will not be discharged completely through to the top of the chimney which could result ultimately in deadly carbon monoxide gas remaining in the home. If you look at other homes in your neighborhood with gas furnaces you will see a metal pipe with a cap on it protruding from the chimney. This is the liner which is usually stainless steal to resist the corrosion of the flue gasses. Have your chimney and furnace inspected ASAP by a LICENSED gas technician and make sure you get several quotes from reputable heating contractors for the repairs as the prices may vary a lot.
It sounds like you messed up the aiming (or wiring) of the flame detector or shorted the safety control wiring. It is time to get a professional in there to help you.
