my car alarm keeps going off if i don't lock the passenger door manual or for no reason at all. so i cut the wires to the siren but the lights keep flashing and the only way to open my door is by using the remote for my alarm. how do i stop my lights from flashing when the alarm is going off?
Removing paint from a concrete driveway can be done with paint strippers. The only drawback to paint strippers is that they are highly toxic and must be used with safety gear. Paint strippers are ideal for paint removal because, unlike concrete grinders, they will not mar the surface of the concrete. Once the driveway is stripped of its former paint, it is ready to be redecorated with a brand new coat of paint, free of cracks and fading 1. Wear goggles, mask, gloves, and protective clothing before working with chemical paint strippers, as they are highly toxic. 2. Protect surrounding grass or plants by blocking off the area with a plastic tarp. Make sure to also block off the driveway, preventing pets or kids from entering since the area will be relatively toxic. The entire process will take up to 24 hours. 3. Sweep and then hose off the driveway to remove dirt, grease and debris. Let the water dry. 4. Select a paint stripper compatible with the type of paint on the driveway. Turpentine and mineral spirits work on most paints, but some paints require a special stripper. 5. Apply the paint stripper over the driveway using a long-handled paint roller. 6. Let the stripper set on the concrete for a set time according to the manufacturer's directions. 7. Scrape off the paint with a long-handled paint scraper. The paint should come off. If not, either let the stripper set for longer or apply more. 8. Shovel the loose paint debris into a plastic trash bag. Pack in all the loose paint and tie the trash bag tightly and discard. 9. Wash the concrete surface with a high-pressure hose. The stripper should have rendered the lead in the paint relatively harmless.
thanks reading that link almost gave me a head ache! do what mr ace says, or use manual focus/ exposure cricky i never heard of an auto function being so complicated try another site is a good idea, the way its all put there is not helpful to many a
just use a presser washer buy or rent one form home depot