which are better for agressive driving
There are two types of fittings you can use. If you have a pipe nipple with the end threaded then you want a female copper adapter. If you need to adapt from a galvanized fitting like a tee or elbow then you want a male copper adapter. Obviously you need the right size, usually 3/4 or 1/2 inch. You must determine this to buy the correct size fitting. Use a good teflon tape on the threaded connections.
You can get fittings at Lowes.But not a good idea.If you use galv. fittings that are connected to the copper pipe in while electrasys will form and clog the fitting.Consider using pvc
This Site Might Help You. RE: How do you properly connect copper pipe to galvanized pipe? The copper thieves stole the little copper I had on my plumbing system. 2 pieces going to hot and cold on the washing machine and 1 piece connected on the topside of water meter to just before the water heater Galvanized on topside of the water meter and and connecting to copper just before the.
I alway get the one that cost the most, they work better.
Compared with conventional steel discs, ceramic brakes not only last four times longer, but also offer high braking performance, even when driving at the limit, as well as high resistance to fading. Braking performance is not diminished even after repeated braking, when driving down a mountain pass, for example. The unsprung rotating masses at the wheels are reduced by a total of around 20 kilograms or 50 percent compared with conventional brake discs, resulting in noticeably improved handling and agility. Semi metallic, will last long but sometimes will squeek or make noise. Organic are softer and usually wont make noise like metallic. Ceramic pads are designed to last as long as metallic but are as quiet as organic.they cost more, so you have to decide if the extra cost is worth it.
