Connect the LED light belt to change the electric wire!! the result electrify! The electric wire heating, the interface is electric hot, how to return a responsibility?
The wire interface is hot, indicating that the wires are not handled properly and have no good contact, resulting in contact resistance, leading to fever. Recommend using sandpaper carefully burnish thread parts, in accordance with the standard method of connecting wires, wires connected, and electrical insulating cloth, to ensure safe use of electricity.
After the LED lamp is switched on, the wires heat up. It is possible that the new wires are smaller in diameter. After the LED lights are transmitted, the working current exceeds the safe current that the wires can carry. Recommended for a thicker wire (for example, is now 1 square wire, replacement of 1.5 square wire, specifically to see the lights with LED is the number of meters, the load is much, select the appropriate wire); or the LED lamp with cut part, so that the existing wire can be left with LED lamp the safety of power supply.
Changed the wire and wire heating, mainly the current rating of the wire is too small, that is to say, the line is too thin. The main reason for the junction fever is not connected, not tight, so a contact resistance, resulting in fever.
