Digital TV set-top box remote control and TV remote control docking unsuccessful?
If the operation is correct, the battery of the remote controller is not enough, and the signal strength can not reach the intensity required by the remote controller. Two remote control batteries are replaced, new batteries can be solved.The set-top box remote controller belongs to the learning remote control, remote control on the television every key control area and study area (9 in total) can learn (copy) of any remote control your TV on a key function.Specific learning methods can refer to the instructions set in the set-top box or the instructions on the back of the remote controller
Turn off the TV and the digital TV. Turn it on again
1. press the setting button of the set-top box first. After 3 seconds, the indicator light of the TV key area is changed into the red light constant.2 and then use the TV remote control at the receiving signal square set-top box remote control TV key area of the window, for example, to set the power button, press the power button on the remote control television, set-top box remote indicator lights flashing3. press the power button of the set-top box remote control TV area immediately, then see the red indicator light of the set-top box again, then press the setting button to indicate the light out. The power button on the set-top box has learned the power button on the TV to control the tv.4, the other settings are the same.
Set-top box built-in instructions:Press the set-top box, remote control, menu key, self help service and remote control guideOperation method:1 press the settings button on the set-top box remote control (about 3 seconds) until the blue light on the remote controller is bright.2, press the button to learn (such as power), the blue light began flashing, at this time the remote control is in the learning receive state.3, the TV remote control and set-top box remote control (top relative emission tube relative), hold down the TV remote control to learn the key for a few seconds, the set-top box remote blue indicator light flashes quickly into a few long bright state, which represents the key learning success.4, if you need to learn other keys, repeat the 2 and 3 steps.5, press the "set" button or 30 seconds without operation, the blue light goes out, indicating that the operation is saved and has exited the learning state.
