Distinction and distinction of cokeSoil coke, improved coke, coke machine coke do, what is the difference between
The concept of coke:Bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization). By high temperature coking coke for blast furnace smelting, casting and gas generated in the process of coking. After the recovery and after the purification of coke oven gas is not only a high calorific value of fuel, and is an important raw material for organic synthesis industry. Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% were used for blast furnace ironmaking blast furnace coke, so often referred to as metallurgical coke is coke. The special cupola molten iron and coke. Coke is the main fuel cupola molten iron. It is melting charge and molten steel overheating, the support column to maintain its good permeability. Therefore, coke should be Preparation of large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
Two, the type of coke:Coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.1, metallurgical coke, metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% are used in blast furnace, the furnace coke often called metallurgical coke.The metallurgical coke quality standard (GB/T1996-94) made in China is the quality standard of blast furnace
2, gasification coke, is dedicated to the production of coke gas, mainly used for solid slag in the fixed bed gas producer, as a gasification raw material, the production of CO and H2 as a combustible component of the gas:C+O2 - CO2+408177KJCO2+C - 2CO-162142KJC+H2O - CO+H2-118628KJC+2H2O - CO2+2H2-75115KJBecause the process of producing the CO and H2 are endothermic reaction, need heat supplied by the coke combustion, so the heat is gasified char gasification process. The gasification coke required low ash content, high ash fusion point, block proper and uniform.
3, calcium carbide coke is conductive body and a heating body for electric arc furnace of coke in the production of calcium carbide. Calcium carbide with coke into the electric arc furnace, arc heat and heat resistance at high temperature (1800-2200 degrees Celsius) under the action of complex reaction and lime, calcium carbide formation in the molten state (carbide). The generation process of the following reaction type available:CaO+3C - CaC2+CO-46.52KLCalcium carbide with coke should have low ash, high reactivity and high resistivity and grain size. The secondary characteristics, but also try to remove the powder and reduce moisture. Its chemical composition and particle size should meet the following requirement: >84% <14% fixed carbon, ash, volatile <2.0%, sulfur