Does the electric water heater really cost electricity?
As we all know, as electric water heaters are electric heating, the power is relatively large, so although the installation and use is very convenient, but many people mistakenly believe that the electric water heater is very electricity. That's not really the case. The following is a detailed account of your surname.The electric energy efficient utilization rate of the electric water heater is at least 90% or more, which is far higher than other types of water heaters, and the power consumption can be saved by proper methods, so as to achieve an ideal use effect.
First, do not use hot water often family, here refers to at least two days using a hot water bath, the use frequency is not high, so we suggest close family in the bath, usually when the water heater is in the closed state. This saves power consumption in the least state and saves electricity to the greatest extent. Second, use the water heater for a day, only uses a small amount of hot water for bathing, the family, if you are in a relatively fixed time to take a bath every day you can buy water heater products, computer control, using the heating function to complete the timing. Turn off the water heater after taking a bath. Third, for the frequent use of (usually at the same time using a water heater, kitchen and bathroom, cooking and washing dishes, bath with hot water) we suggest keeping the water heater has been in the open state, can be used according to the frequency and amount of water used to regulate water temperature, amount is small, the temperature a little lower, using a large amount of cases can be a bit higher. Fourth, for the situation that has been in use (generally referred to as commercial salons and other commercial users), it can only keep the water heater normally open, but also according to the number of guests to properly adjust the temperature of hot water. So as to save the electricity bill to the greatest extent.
The electric water heater is heated by a heating rod, and the water is heated and the temperature rises to the temperature we set, and the heater stops heating. When heating, the power of the water heater is the actual power of the water heater. When the heater is stopped, the heater is closed and does not consume electricity. The method of saving energy and electricity is to shorten the heating time as much as possible, increase the effect of heat preservation, and reduce unnecessary hot water loss.Here on the basis of the use of different circumstances, respectively, introduced energy-saving methods:
