My family living room layer of the plateau 3030MM, hanging 2-level ceiling hanging chandelier position 2800, is now the gypsum board top with the original roof 23CM spacing How to install crystal chandeliers, chandeliers are heavier, carpentry said with the expansion of the top Fixed, I would like to ask 23CM gap can play up the expansion of silk?
As well as the staircase position is now inclined to the top of the hanging now, the above empty 1 m 4 high, wood workers at that time to leave a ceiling with the boom that the lamp fixed on top. Can I?
The ceiling are finished now all the latex paint are brush, and buy online buyers say that the poor installation, so to help!
It is advisable to use the method of the boom, or to make a suggestion in the hollow position of the ceiling. The steel structure is safe and stable.
The carpentry was given a ceiling with a ceiling to say that the lamp was fixed on top and could be installed
Simple point approach
1. In the installation of chandeliers to open the position of 60MM empty, with a long impact drill drill in the ceiling drilling, with the top of the expansion of the kind of expansion wire can be fixed.
2 Woodworking boom is the hanging wire of light steel keel? If it can be used.
Today, the 23 cm spacing, the impact drill has been unable to drill, unless the 23 cm bottom panel removed.
Staircase position reserved for the hanging bar, for the installation of lamps is feasible and correct - the installation of crystal lamps, then also need to reserve this hanging, and that hanging between the top (ho) and the floor between the The connector is the expansion bolt.
Want to install the crystal lamp, it should be in the ceiling (shape) before the expansion bolts in advance to the top of the top, that should be prepared in advance to prepare the crystal lamp - crystal lamp is relatively heavy!
