Hammer head + drill, make tile work?
Round headed! Teach you a method: use square hammer drill bit, insert it into the hammer (hammer drill press must not let the end, directly inserted into the line). Drill, hand drill, open only to the drill head alloy grinding ceramic tile instead of hammer drill. Slowly increase the force, the grinding head tiles, and then reinstall the drill bit, hit the wall on the line.
There's no need to change the impact bit. Tap through the tile section and continue with the screw depth. Pay attention to one hole, remove the glass bit, and clear the hollow part of the blocked bit.
Use the electric drill on the tile, the tile is not fragile method:1, the location of the hole needs to be pre calibrated to ensure the level. (pay attention to the corresponding location in the wall, no water and electricity lines)2, with bits of glass tiles in the inclined direction when drilling, first hit a pit; otherwise smooth tile is too bad; or not all tiles, with nails directly make a little hole; it is accurate, can also use a hole (size) have a best plate.3, with a shallow mark, you can remove the location of the hole plate, and then. Prepare a water bottle in advance, drill a hole in the bottle cap, and fill the bottle with water. Then, when drilling, at the same time to water into the drill bit and ceramic tile contact parts; especially all ceramic tile, must have water oh.
Hammer bit tiles do not add round, with a glass drilling on the tile.
