Home > categories > Construction & Real Estate > Wash Basin > Home improvement, the bathroom floor drain, toilet and washbasin drainage pipe should be how to arrange the connection?
Question:

Home improvement, the bathroom floor drain, toilet and washbasin drainage pipe should be how to arrange the connection?

Own self-built building ready to renovate. The bathroom is designed with a floor drain, a toilet, a washbasin, and a sink with a sink. See the net posted that leak, wash basin and toilet can not connect the same sewer. Because the white I am in rural areas, decoration guerrillas are not responsible, if the owners do not know the circumstances do not propose a separate installation of the pipeline, decoration ...

Answer:

⑤ fixed plastic drainage horizontal pipe fixed spacing: diameter 50 ram for the short-tailed bird 6 m, 75 mm for the 0.8m, l60mm lm. Between plastic pipe and steel bracket should be soft. ⑥ Connect to the outdoor drain pipe, through the wall or foundation, the application of 45 ? three links and 45 ° elbow connection, and should be at the top of the vertical pipe section clear mouth. ⑦ concealed or buried drainage pipes, in the hidden before the oath to do irrigation test, the irrigation height should not be lower than the ground floor height. Try the law i will be temporary drainage side of the drainage pipe, the drainage pipe water, full water for 15 minutes, then fill the water for 5 minutes, the liquid does not drop for qualified.
Drain pipe in the laying and connection process to note the following: ① The connection of the drain pipe and the riser shall be 45 ° tee or 45 ° four-way and 90 ° oblique tee or 9QT oblique four-way. The connection between the riser and the end of the discharge pipe shall be carried out with two 45 ° elbows or 90 * elbows whose radius is not less than 4 times the diameter of the pipe. ② drainage pipes to have a certain slope. ③ construction is strictly prohibited the original identification of water pipe inspection bend _ Tao gas p sealed ? dark cover, in the inspection port should be installed check the i door; W ceiling row # # horizontal angle of the small angle of 135 ° Branch pipe, should be installed in the elbow at the mouth or check the mouth. ④ Adhesive Drainage Plastic Pipe Interface Application Adhesive Adhesive. : The physical and chemical properties of the adhesive must meet the product description and design requirements.
Home improvement, the bathroom floor drain, toilet and washbasin drainage pipe should be how to arrange the connection? Toilet toilet can not be used with the other two common, even if you are using a sinking bend is not OK, if it is rural self-built, you can wash your face and floor drain water pipes connected to the outdoor rain pipe, To enter the septic tank, the smell will turn up, so it must not be shared. 2. The kitchen has only one sink of sewer, the original decoration is the sink of the sewer and the roof of the rain riser connected. How should the sewer be arranged now? (Is the kitchen 2 meters from the bathroom and can connect with the toilet in the bathroom?) The kitchen under the water pipe by the original way no problem, you do not even go to the bathroom, you can connect to the outdoor rain pipe, but in the water to do careful outdoor Yinjing.
Toilet sewage pipes can not be connected with the floor drain, washbasin drainage pipes connected together, should be separated from the pipeline. Usually the toilet pipe diameter is 110mm, to be used independently; ground drain and other drainage pipe diameter of 75mm (or 50mm), according to the distance of the distance by a certain slope connected to the drainage main pipeline.

Share to: