Not the starter problem lamp did not bad some time after a few hours before the bright
Is not the voltage problem ah? The Please know how to help or help you have to learn every day
Home lights to open the switch after a long time to light the reasons and solutions:
First, the power supply voltage may be too low. In the light after the demolition of the starter, the lamp can not always shine, and soon will automatically go out.
Second, the lamp aging, resulting in the start after the lamp current decreases, the lamp terminal voltage is too high, more than the starter Kai Hui voltage, resulting in frequent start. You can try to remove the starter after the lamp is lit, if you can not turn off the starter.
Energy-saving lamps, also known as energy-saving light bulbs, electronic bulbs, compact fluorescent lamps and integrated fluorescent lamps, refers to the combination of fluorescent lamps and ballasts (ballast) into a whole lighting equipment.
First change a jump bubble, if not good, took the lamp to the store to the clerk to try, if the lamp is good for the ballast, the lamp is bad on the lamp
Is that kind of long fluorescent lamp? Then you first check the 2 side of the lamp to see if there is no burning caused by poor contact,
Then there is the lamp and the starter!
Fluorescent pin and lamp holder bad contact, change the direction of the lamp or power outage adjustment socket socket. And then not the words of the ballast is the problem, there may be interrupted when the internal line. I suggest you change the electronic ballast is better.
