Concrete shear wall slot can generally Zang under the large number of PVC wire and PPR water pipe can lead box? Can not cut off the steel.
The camera has a sound and video is open to the development of the system, with the camera to give you the audio and video lines, connect the TV audio and video input interface, with the TV remote control AV / TV switch button, The TV switch to audio and video input, you can play. Storm video playback settings in the "fluency priority" option, you try to improve the same situation as slow down the action.
CANON cameras are generally equipped with HDMI output interface, you can directly and the TV's HDMI input interface; method is as follows: . prepare an HDMI cable (the camera is generally distributed), one into the TV's HDMI input interface, the other end Insert the CANON camera HDMI output interface; . start the TV and camera; the TV signal source switch to HDMI mode, the TV will display the camera's startup screen, indicating that the TV and the camera has been successfully connected; . The next picture can be played on the camera to play the recorded picture or recorded video, the camera screen and sound will be synchronized through the HDMI cable to the TV to play out.
With the video output on the camera connected to the TV video input on it. . you can use high-definition HDMI interface . you can use the video signal (composite) As for the playback card, it is MTS file problem. The AVCHD directory in the camera's hard disk shows the MTS file, which is a high-definition video file encoded in MPGE-4AVC / H.264 format and converted to M2TS via the supplied PMB to the computer hard disk. (For the convenience of late, we can also manually change the file name for the M2TS) This MPEG4H2.64 optimized compression based on the video format out of the video quality is significantly better than MPEG2 compressed HD HD format. But the most troubled everyone's problems have emerged, support M2TS editing software too little. At present, only SONY own VEGAS7.0E above version and canpousEdius4.54 version of the AVCHD have a good support, but the basic MPEG4 compressed video for the preparation of low user editing, is simply a nightmare. Edit the M2Ts when the card is very slow, slow to open the file, the computer suddenly crash or restart the problem, because the CPU load is too large to edit. In order to facilitate the editing MTS format, you need to convert the material to HDAVI or HDMPEG2 format, so that the computer is not only fast playback, editing and not card. On the camera, post-editing information, you can refer to my "Google space" in the "post-editing equipment" section
