does my base coat have to match to color of the metalflakes? say if i wanted a green metalflake. because alot of sites are saying to use a black base coat. then spray your clear coat with the flake additive in it. how would i do it. i understand the whole sanding and stuff like that.
Thats about as wise as saying, If God is real, why do a lot of christians breathe air everyday. Why don't they just have faith that God will provide them oxygen?
Have your dad buy a new one. They aren't that expensive.and they are worth every penny.
Printers attract a lot of dirt and dust (a lot of it comes from the paper) but this can normally be fixed easily by cleaning the rollers. What I do it take out the paper and open the top cover of the printer and remove the paper feed tray. Check for and remove any jammed paper. Then I take a lint-free cloth moistened with a little water (don’t use harsh chemicals such as isopropyl alcohol because this can destroy the rubber on the rollers) and use this to clean the rollers. Use your thumb to turn the rollers so that you get all 360° of rollers. Note: Be careful not to touch or clean the rod that the printer head slides along – cleaning this removes the lubricating grease and shortens the life of the printer. Once you’re done, wait for the rollers to dry out and then try the printer again
