How does the jCG wireless router set up the Q5 repeater?
Set the main router (legend is FAST brand):1, enter the router management page, set the LAN port IP:192.168.1.1 (keep the default settings);2, DHCP service settings: enabled (must be enabled);3, SSID number: WIFI user name, can be changed to remember, the default is. Bridge router to scan, select the number;Channel: 6 (1 or 11). The bridge should be consistent with this channel from the router;Start wireless function: tick;Turn on SSID radio: tick;Account No. WDS: no tick;4, wireless security settings: select WPA-PSK/WPA2-PSK;Authentication type; automatic;Encryption algorithm: automatic;PSK password: WIFI password, these 4 settings must be consistent with those from the router;5, save, restart the router.
The principle is that they will relay transmit a signal, when you connect the log switch relay mode (some repeaters used to relay more than) you can find yourself in the emission signal routing in the WiFi list, after the connection (to be renamed) to achieve the forwarding of the original signal, so as to realize the expansion of a signal enhancement objective.
Set from router1, LAN port IP:192.168.1.2 (must modify the LAN port IP address, make it and the main router segment is different, to prevent IP address conflict);2, DHCP service settings: not enabled (from the router must close DHCP, assigned by the main router);3, SSID: TP-LINK_B26F04 (WIFI user name, can be changed to remember, the default is. )Channel: 6 (1 or 11). The channel must be consistent with the primary router;Start wireless function: tick;Turn on SSID radio: tick;Opening account WDS: tick;Hit scan, and select SSID as the main router for HP;4, wireless security settings: select WPA-PSK/WPA2-PSK;Authentication type; automatic;Encryption algorithm: automatic;PSK password: WIFI password, these 43 settings must be consistent with the main router;5, save, restart the router.
