How much water softener does a 18 ton steam boiler need to work with for 24 hours?
This is according to the amount of water per hour to configuration, there are two options: one is the single water allocation, with per hour processing capacity of 20 - 25 tons of water softening water processor, but at the same time must be equipped with a storage capacity of more than three times larger than that of evaporation, water storage tank of 50 tons the purpose is to ensure that the operation of the boiler, the buffer in softener regeneration, failure. Two is to configure two 20 - 25 tons / hour processing capacity softener, but also need to configure a storage capacity of more than 20 tons of water tank, two softener is one with a standby.
001*7 positive resin 1800L (containing 1700 salt valves, salt suction pipes and fittings)1000, dedicated upper and lower water distributor 2 setsCentral tube DN50PVC2 root2 inches normally open solenoid valve 2 (220V requirements, because the control power is 12V, if the 12V solenoid valve controller power supply can not control electromagnetic valve)The following is a project I did in January this year, please refer to the map.
Control mode: fully automatic. It is regenerated by the flow meter control equipment. When the setting value is zero, the flowmeter starts the regeneration of the signal.Configuration table:2900 electronic flow controller 1 sets (two units, including master control and secondary control 1 each)1000*2200 exchange tank 2 (open 6 inch flange to 4 inch internal teeth)PE1500L 1 (salt box with double salt)
FLECK2900 system 7 (flow type one with one standby)Throughput: 20T/HInlet and outlet: 2 inchesSewage outlet: 1 inchesSalt suction mouth: 12*6.5 hoseMaterial: unleaded brass
