How to adjust the signal TV receiver pot
Resolvent：1: connect the line, adjust the TV to AV mode2: turn on the receiver, press the menu key (or press the star key directly or press F3), then transfer to the system settings, then press the confirmation key, then enter the password "0000" or "9999", press the confirmation key3: look at the sub menu "installation and signal detection, in the lower right corner of the screen is two line display signal strength and signal quality for two color, and then around the adjustable elevation and side pot placed southwest slowly up and down, the numerical signal quality to maximum fixed pot and tuner, exit button can press see the show (because the factory orders have existed pre season receiver machine)
1. Connect good equipment. Set-top boxes generally have preset data, and if not, some program data should be entered. 2. Turn on the TV, set top box, and make the set-top box in "information" status. 3. Move around the pot frame, select the range according to the needs of the satellite, and adjust! 4. Adjust the adjusting lever up and down, and fix the nut when the signal quality is the best! 5. The adjustment fixture above the tuner, the "0" scale in a horizontal position! The mobile tuner under the best focus! 6. Fixed nut. Sign out。 OK
Matters needing attention：1: to recovery factory settings and automatic search, because the satellite is not aligned in the pot when absolutely not search programs, but the original pre program parameters will also be removed.2: if the quality of the signal does not go up, you have to checkThe tuner polarization direction is correct, ensure that North Korea is at the top of the 0 scale.The angle of elevation should be approximately 15 degrees behind the vertical.The horizontal direction should be maintained at about 43 degrees, South West direction.Finally, the man who sells your goods wants him to adjust it to you.
