How to clean the adhesive tape iron bowl with... The label has to tear.. Found viscose wash not to drop
The water after dry, wipe with a soft rubber, rubbed out easily. Hope to adopt.
Alcohol to divide. Dip in with soft cloth, such as take adequate 95% alcohol, and then gently wipe the stickers, stickers will soften from easily, while alcohol in general will not have any plastic parts or the car paint surface damage. But sometimes found that alcohol is not very effective for some stickers, this is can dip in with soft cloth to take a few light gasoline wipe stickers, at this time, should be paid attention to because of gasoline has "dissolved" effect to some kind of plastic or paint, so be careful to use, either to graze in an important place to watch first, if no problem will use; But must pay attention to don't use much fuel, and shorter time as far as possible! I tried, in car body surface wipe with gasoline for short periods of time, paint film on the surface of a body no apparent effect. As a result, stickers will be very easy to remove...
With toothpaste wipe, slowly fell down, clean and sanitary.
In this paper on the bowls the non-drying label, removal methods are: 1, with hot blowing a little heat, jie in addition; 2, soak in hot water, after being soaked, also can easily remove; 3, if not too dense, slow operation, general can direct jie in addition; 4, a few drops of cooking oil, after being soaked can easily remove; 5, if have been removed, but not the stickers, can use alcohol to wipe, with the hand rub except; Commonly used several methods are also more than just about, if there are other better and more convenient way, welcome to share! This you use alcohol to clean!